HOME ABOUT US WHAT'S NEW SERVICES CUSTOMER CARS ACCOUNT CONTACT US
Categories
Manufacturers
Information
Information about product
Spohn Performance
82-02 Spohn Full Length Adjustable Torque Arm
[399]
$319.00
Part Number: 399
 
Manufacturer: Spohn Performance
 
Description:
399.jpg - 82-02 Spohn Full Length Adjustable Torque Arm
Click to enlarge

Full length transmission mounted adjustable torque arm for the 1982-2002 F-Body.

Replace your flimsy factory torque arm with a durable Spohn tubular version and put the power where it belongs - the pavement! Built from 1.25" x .120" tubing with a heavy-duty 3/8" rear mounting bracket. Bolts directly in place of factory torque arm using all factory mounting locations. Requires no welding or drilling. Equipped with an adjuster for changing pinion angle and a new, low deflection polyurethane front bushing.

If you want serious performance, handling, and traction when you're at the dragstrip, AutoX, or road racing; then you need a Spohn Performance fully adjustable torque arm, here's what it'll do:

  • Attaches to the rear axle and controls rear end torque during acceleration, transferring this energy into the tires, increasing straight line traction.
  • Reduces nose-dive during braking
  • Eliminates wheelhop
  • Increases sidebite during corner exit acceleration
  • Bolt-on system does not require complete interior removal as with other kits
  • No fabrication, welding or drilling required - 100% bolt-in installation!
  • Provides adjustable pinion angle
  • FREE angle finder included to set pinion angle

Build Specifications:

  • Constructed of 1.25" o.d. x .120" wall DOM (drawn over mandrel) seamless mild steel tubing
  • Front "stub" of torque arm is reinforced by TIG welding a piece of 1" solid 4140 chrome moly into the i.d. of the front snub. This is the strongest transmission mounted torque arm on the market = bullet-proof!
  • TIG welded 4130 chrome moly threaded tube adapters
  • Heavy-duty 3/8" thick steel rear housing mounting plates
  • Polyurethane bushing front mount for minimal road noise
  • Front torque arm polyurethane bushing mount allows for fore and aft travel, as well as free rotational travel for bind-free performance
  • Rear of torque arm mounts to the 3/8" thick steel rear housing mounting plates via two 3/4"-16 NFT x 5/8" bore x 7/8" thick solid steel rod ends. These are solid rod ends, not spherical bearing rod ends, so noise is of no concern. Grade 8 - 5/8" bolts and 5/8" nylock nuts are used.
  • Integral Pinion Angle Adjuster between the bottom rear solid rod end and the bottom rear torque arm tube allows for easy pinion angle adjustment. A simple turn of the wrench will give you 6 degrees of pinion angle adjustment, it's that simple.
  • Entire package is a complete bolt-in assembly using existing mounting points on the vehicle. No drilling or welding is required!
  • This is a proven product being run on some of the fastest F-Bodies in the country!
  • Rear mounting bracket is designed to fit on the OEM rear or an aftermarket 12 bolt or Ford 9" rear
  • Available powder coated red or black.

NOTE: 1982-1992 cars require the use of a factory torque arm bushing clamshell mount designed for bushing type 7-1609. If your vehicle is equipped with a 7-1611 type bushing, you will need to get the 7-1609 type clamshell.

Now Available: The ultimate in bullet-proof lightweight strength, 100% TIG welded chrome moly construction! Same as above, but torque arm is constructed entirely from 1.25" x .095" 4130 chrome moly tubing. Make your choice below.

 
Options:
Color:
Material:
 
Reviews: 1
This product was added to our catalog on Tuesday 22 February, 2005.
Back Reviews
Customers who bought this product also purchased
93-02 Camaro/Firebird Vogtland Springs
93-02 Camaro/Firebird Vogtland Springs
82-02 Fbody Spohn Performance Panhard Bar - Adjustable with Poly/Del-Sphere Ends
82-02 Fbody Spohn Performance Panhard Bar - Adjustable with Poly/Del-Sphere Ends
82-02 Fbody Spohn Performance Rear LCA's Tubular Adj. w/Del-Sphere Pivot Joint/Poly Combo
82-02 Fbody Spohn Performance Rear LCA's Tubular Adj. w/Del-Sphere Pivot Joint/Poly Combo
98-02 LS1 ASP Racing Alternator Overdrive Pulley
98-02 LS1 ASP Racing Alternator Overdrive Pulley
82-02 Fbody J&M Products Poly/Poly Adjustable Lower Rear Control Arms
82-02 Fbody J&M Products Poly/Poly Adjustable Lower Rear Control Arms
98-02 LS1 Fbody Turn One Billet Aluminum Power Steering Pulley
98-02 LS1 Fbody Turn One Billet Aluminum Power Steering Pulley

Shopping Cart more
0 items
Tell A Friend
 
Tell someone you know about this product.
Online Security

 


secure servers