HOME ABOUT US WHAT'S NEW SERVICES CUSTOMER CARS ACCOUNT CONTACT US
Categories
Manufacturers
Information
Information about product
BMR Fabrication
93-02 Fbody BMR Lowering Springs
[SP001]
$299.95
Part Number: SP001
 
Manufacturer: BMR Fabrication
 
Description:
sp001.jpg - 93-02 Fbody BMR Lowering Springs
Click to enlarge

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your F-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.

Blending aesthetics and performance, BMR has designed the SP001 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your GM F-body 1.25-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!

BMR Suspension’s SP001 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.


Front spring rates - 550 lbs/in linear
Rear spring rates - 160 lbs/in dual rate

 
Reviews: 1
This product was added to our catalog on Wednesday 23 April, 2008.
Back Reviews
Customers who bought this product also purchased
98-02 LS1 Fbody Speed Engineering 1 7/8" Long Tube Headers & Offroad Ypipe - Race Version
98-02 LS1 Fbody Speed Engineering 1 7/8" Long Tube Headers & Offroad Ypipe - Race Version
93-02 Fbody Speed Engineering Lower Control Arm Relocation Brackets - Black
93-02 Fbody Speed Engineering Lower Control Arm Relocation Brackets - Black
93-97 LT1 Fbody BMR Torque Arm Relocation Kit w/ Manual Transmission
93-97 LT1 Fbody BMR Torque Arm Relocation Kit w/ Manual Transmission
98-02 F-Body Texas Speed Stainless Steel Catback w/ Dual/Dual Tips and Cut Out
98-02 F-Body Texas Speed Stainless Steel Catback w/ Dual/Dual Tips and Cut Out
BadlanzHPE 3" Electric Single Cutout
BadlanzHPE 3" Electric Single Cutout
82-02 Fbody BMR Fabrication Rear Hollow Sway Bar with Bushings (25mm)
82-02 Fbody BMR Fabrication Rear Hollow Sway Bar with Bushings (25mm)

Shopping Cart more
0 items
Tell A Friend
 
Tell someone you know about this product.
Online Security

 


secure servers