HOME ABOUT US WHAT'S NEW SERVICES CUSTOMER CARS ACCOUNT CONTACT US
Categories
Manufacturers
Information
Information about product
Fast Toys Performance
98-02 LS1 JAAM WS6 Ram Air Kit
[JAAMRAM]
$101.00
Part Number: JAAMRAM
 
Manufacturer: Fast Toys Performance
 
Description:
jaam1.jpg - 98-02 LS1 JAAM WS6 Ram Air Kit
Click to enlarge

98-02 (Trans Am WS6, Firehawk, Formula WS6) JAAM Ram Air Kit

The JAAM Ram Air System is designed to force cold, high-pressure air into your engine to build more horsepower. By using all four snorkels of your WS6, the system brings in cold fresh air, which contains more oxygen (denser) than the warmer air the car normally breathes. In addition, this system will achieve a substantial pressurizing of the LS1 air box and at speeds as low as 60 mph.

Your car will also benefit from improved throttle response, better highway passing power and increased top end pulling power. Many customers have also been experiencing 5-10 % better fuel economy from the increased efficiency of their motors. Typical 1/4-mile improvements are 1 to 2 tenths and 1.5-2.5 MPH increase in trap speed. This is over the free air mod and factory installed ram air systems!

The system has been tested on a 2000 WS6 and has shown to have 4 times more pressure under full throttle then the stock WS6 ram air and 3.5 times more than the Free Ram Air mod. Testing has shown that the pressure drops less than .25 WC for the SDS ram air system vs. 1.0 WC for stock WS6 ram air under full throttle conditions.

The JAAM Ram Air System has been tested under extreme rain conditions and has shown that no moisture will make it past the air cleaner. Under these conditions, the air filter might be slightly damp, but dries out within minutes. Because of this, we recommend using a K&N or Holley Power Shot air filter. This product has undergone 3 years of field testing and still has the original seals. No failures have occurred.

This low cost modification can give you 15-20 HP increases at 100 MPH. Power will continue to increase as you go faster! The system is constructed of 5061 aluminum that is Laser cut and is features clear anodized finish.

Don't settle for poor imitations, which do not offer the same level of testing, engineering, quality or performance. The JAAM Ram Air System has been designed and tested by Mechanical Engineers using water column pressure gages. We even tested our system without snorkels screens with all openings sealed and saw no increase in pressure. This is one modification that you can really feel the difference.

Includes all necessary hardware and detailed instructions to complete an easy, bolt-on installation.

Just want to dress up your engine bay?

For those of you just looking to dress up your engine bay, the bottom air diverter plate can be purchased by itself with all the necessary stainless steel installation hardware. This will help increase air flow to the air box but does not create a ram air effect.

Graph

Graph
Click to enlarge

Bottom Plate

Bird Style
Click to enlarge

Plate Installed

Plate Installed
Click to enlarge

 
Options:
Full Ram Air Kit:
 
Reviews: 3
This product was added to our catalog on Wednesday 31 October, 2007.
Back Reviews
Customers who bought this product also purchased
93-02 LS1/LT1 Fbody Yofab Billet Radiator Cap
93-02 LS1/LT1 Fbody Yofab Billet Radiator Cap
01-02 LS1 JET Power Flow Mass Air Sensor (85mm)
01-02 LS1 JET Power Flow Mass Air Sensor (85mm)
93-02 LS1/LT1 Fbody Yofab Billet Radiator Overflow Cap
93-02 LS1/LT1 Fbody Yofab Billet Radiator Overflow Cap
93-02 LS1/LT1 Fbody Yofab Billet Power Steering Cap
93-02 LS1/LT1 Fbody Yofab Billet Power Steering Cap
94-02 LT1/LS1 RPM Billet High Flow Ported MAF Ends
94-02 LT1/LS1 RPM Billet High Flow Ported MAF Ends
WS6store Skip Shift Eliminator
WS6store Skip Shift Eliminator

Shopping Cart more
0 items
Tell A Friend
 
Tell someone you know about this product.
Online Security

 


secure servers