| If your GM Coil has two connectors, usually one gray and one black, this is a direct replacement performance coil. This style coil was used on pretty much anything that came out of GM until 1996 (except DIS systems).
MSD's Blaster GM Coil features a red housing that surrounds a set of Blaster 2 influenced windings for improved output. The Coil mounts in the same location as the stock coil and plugs right in.
Blaster GM Dual Connector Coil - PN 8226
Installation Tip: If you plan to install an MSD Ignition with your Blaster GM Coil, use a PN 8876 Harness for a direct plug-in installation.
BLASTER GM SPECIFICATIONS
- Primary Resistance: 0.45 ohms
- Secondary Resistance: 5.5K ohms
- Maximum Voltage: 48,000 volts
- Inductance: 7 mH
- Turns Ratio: 85:1
- Peak Current: 220 mA
- Spark Duration: 250 Us
- Tested with an MSD 6AL at the plug gap.
|
